.建立 NFS VMKernel
一、建立 VMKernel for NFS
二、驗證
一、建立 VMKernel for NFS
01-01.新增 VMkernel
建立組態 > 硬體 > 網路功能 > 新增網路

選擇 VMkernel

如果是企業內部使用
建議:
1.所有主機都能安裝到相同張數的NIC
才不會未來自己苦了自己
2.至少能有8張NIC,GiGA的現在很便宜了
真的很便宜了,採購的時候,就順便買進來
3.每台主機的網卡序號,對應的功能都要相同
未來在佈署 虛擬分佈型交換器(vDS) 的時候,才不會亂
照規劃
選第4張和第6張網卡,跑NFS
取消勾選 第1張網卡

網路標籤: NFS
VLAN ID: 50

IP 位址: 192.168.50.28
子網路遮罩: 255.255.255.0

按下完成

就會多了一個
標準交換器 vSphere Standard Switch

二、驗證
02-01.
很遺憾
以目前現有的階段
無法在此刻,就進行驗證
到這邊,我們完成了
1.建立 VMKernel for NFS
2.設定 vlan 50 for NFS use
3.掛載 NFS Share Storage
沒有留言:
張貼留言